Series AB Booster Pump

Air to Air Booster

> > >

AIR TO AIR BOOSTER

Resources:

Printable PDF

The Lynair Automatic Airline Booster Pump was designed to boost airline pressure automatically in surge tanks or die cushions, or for any high pressure application, such as testing, where small quantities of high pressure air are needed.

To operate this booster you simply pipe airline pressure to the master control valve, to the intake side of the booster, and run a high pressure line from the booster to your surge tank. The booster will then operate automatically to boost pressure in the die cushion or surge tank in the desired ratio. This booster is completely valved, ready to operate, with only three airline connections necessary. The booster is completely air actuated with no electrical connections necessary.

This booster can be purchased in varying ratios from 1.44 to 1 through 6.25 to 1. For example you could buy a booster to boost air pressure from 100 PSI to 144 PSI, or from 100 PSI to 625 PSI. The booster will start and stop automatically to keep the desired high pressure in your surge tank or die cushion.

This booster has proven itself extremely useful in testing work where commercial refrigeration units have to be tested under water at high pressure. The booster is easily moved from one location to another in your factory and is very economical to operate.

A pressure regulator, filter, and lubricator can be furnished with Lynair boosters as a service to the customer at extra cost.

The construction of the Lynair booster is the same high quality construction as our series “A” air cylinders. Detail information on construction features may be obtained by referring to pages 12 and 13.